This is the original, yet updated, version of the Dragon Emerging Book Nook!

What’s New in This Update:

• 12mm glass eye slots added-Highly requested and now included, matching the other Dragon Emerging book nooks.

• Reworked rear horns- Adjusted to significantly reduce supports and lower failure rates.

• Hand combined with the head- No more gluing the hand in place. One less step and a stronger final print.

• Easier multicolor printing- All horns are separated as individual objects, making it simple to point-and-click color them in Bambu Studio.

• Standardized dimensions- The box now matches the same size as the other Dragon Emerging book nooks in my catalog for a consistent shelf look.

Print Settings I Used-

Head (multicolor, 3 colors, Bambu Lab A1):

• 0.20 layer height

• 2 walls

• 5% gyroid infill

• Auto tree supports enabled

• 100% scale

• 658g filament

• 1 day 18 hours on a Bambu Lab A1

Print time and filament usage will be significantly lower if you print in fewer colors or single color.

Tail (2 colors):

• 449g filament

• 1 day 7 hours

Book Nook Box (recommended):

• 3 walls (highly recommended to reduce the visible line where solid geometry meets thin walls)

• 180g filament

• 4 hours print time

Full-Scale Dimensions

Head: 158 × 192 × 148 mm

Tail: 169 × 187 × 183 mm

Dimensions will change proportionally if you scale the model.

As always, feel free to scale, recolor, or customize it to fit your setup!

Happy printing, Christian, @CraftyKid3D